Chart Name
|
Description
|
Notes
|
Use for: Availability Monitoring
|
Ping Time
|
Diagrams minimum, average and/or maximum ping response (round-trip) time values.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
Ping Packet Loss
|
Diagrams average packet loss rate values.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
Response Time Top 10
|
Presents devices with the greatest average round trip time.
|
The chart is automatically created by a corresponding auto run action in Top 10 group and is available at Top 10 dashboard.
|
Packet Loss Rate Top 10
|
Presents devices with the greatest packet loss rate.
|
The chart is automatically created by a corresponding auto run action in Top 10 group and is available at Top 10 dashboard.
|
Service State
|
Presents service state: "On" as 1, "Off" as 0
|
The chart can be created for a particular Network Host context using Setup Monitoring Profile action (Availability group).
|
Use for: Performance Monitoring
|
CPU Load (SNMP)
|
Diagrams CPU(s) load.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
CPU Load Top 10 (SNMP)
|
Presents devices with the greatest CPU utilization.
|
The chart is automatically created by a corresponding auto run action in Top 10 group and is available at Top 10 dashboard.
|
|
Diagrams total number of processes running on a certain computer or device. Data is fetched via SNMP.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
|
Diagrams instance count of a particular process. Process instance is identified by process name, path and parameters. Data is fetched via SNMP.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
Process Count (WMI)
|
Diagrams total number of processes running on a certain computer or device. Data is fetched via WMI.
|
The chart can be created for a particular WMI-enabled context using Setup Monitoring Profile action.
|
|
Diagrams instance count of a particular process identified by process name. Data is fetched via WMI.
|
The chart can be created for a particular WMI-enabled context using Setup Monitoring Profile action.
|
Memory And Disk Space Usage (SNMP)
|
Diagrams usage percentage of storage areas on the host, including physical memory, virtual memory, and disk space.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
Memory Usage Top 10 (SNMP)
|
Presents devices with the greatest memory usage.
|
The chart is automatically created by a corresponding auto run action in Top 10 group and is available at Top 10 dashboard.
|
Disk Volumes Utilization Top 10 (SNMP)
|
Presents disk volumes and corresponding devices with the greatest utilization percentage.
|
The chart is automatically created by a corresponding auto run action in Top 10 group and is available at Top 10 dashboard.
|
Use for: Traffic and Bandwidth Monitoring
|
Network Interface Traffic (SNMP)
|
Shows incoming and outgoing traffic of specified network interfaces.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
Interface Traffic Top 10 (SNMP)
|
Presents network interfaces and corresponding devices with the greatest total (incoming and outgoing) traffic.
|
The chart is automatically created by a corresponding auto run action in Top 10 group and is available at Top 10 dashboard.
|
Interface Bandwidth Utilization Top 10
|
Presents network interfaces and corresponding devices with the greatest total (incoming and outgoing) bandwidth utilization percentage.
|
The chart is automatically created by a corresponding auto run action in Top 10 group and is available at Top 10 dashboard.
|
NetFlow Charts
|
Shows traffic information collected using NetFlow.
|
Charts of this kind can be created using NetFlow views. Refer to NetFlow Charting Widgets section for details.
|
Use for: Router and Switch Monitoring
|
Network Interface Errors (SNMP)
|
Shows number of error packets. Error packets are inbound packets that contain errors preventing them from being deliverable to a higher-layer protocol.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
Network Interface Discards (SNMP)
|
Diagrams number of discarded packets: inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. For example, if too many packets are received, and the protocol stack does not have enough resources to properly handle the packet, it may be discarded.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
Use for: VMware Server Monitoring
|
Virtual Machine CPU Utilization
|
Indicates how much of the processor's capacity is currently used by the virtual machine(s).
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Disk Writes Number
|
Diagrams disk utilization, measured as a number of disk write operations performed since last synchronization.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Disk Reads Number
|
Diagrams disk utilization, measured as a number of disk read operations performed since last synchronization.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Disk Write Rate
|
Diagrams disk write rate in kilobytes per second.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Disk Read Rate
|
Diagrams disk read rate in kilobytes per second.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Memory Volume
|
Indicates current memory utilization in kilobytes.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Memory Percentage
|
Indicates current memory utilization percentage, i.e. memory used relative to amount of memory the virtual machine was configured with.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Network Packets Transmitted
|
Diagrams a number of packets transmitted.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Network Packets Received
|
Diagrams a number of packets received.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Network Transfer Rate
|
Diagrams current transfer rate.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
VM Network Receive Rate
|
Diagrams current receive rate.
|
The chart can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
Use for: Web Server Monitoring
|
Apache Web Server (SNMP) Charts
|
Diagrams Apache Web Server monitoring data: traffic, requests rate, processes.
|
These charts can be created for a particular SNMP-enabled context using Setup Monitoring Profile action.
|
Use for: FTP Server Monitoring
|
FTP File Size
|
Diagrams size of a file monitored via FTP.
|
The chart can be created for a particular FTP-enabled device using Setup Monitoring Profile action.
|