Here is a list of Device Server LED error patterns that you might encounter if there is a problem with your setup:
 | IP address not obtained. This has nothing to do with Dynamic DNS itself. It just means that your Device Server is configured to obtain its IP from the DHCP server and for some reason this is not working properly. The Device Server will only attempt to register at tibbo.net after it has successfully configured of its own IP. |
 | Sending ARP. You have specified an incorrect Gateway IP-address/NetMask or your network router is not setup correctly. |
 | TCP connection is being opened. You have entered incorrect Destination IP-address or dDNS Server IP-address or your network router is not setup correctly. |
 | TCP connection reset by the network host. You have specified incorrect Destination IP-address/Destination Port or dDNS Server Port/dDNS Server IP-address. |
 | Login failed. LinkServer has rejected login from your Device Server. Make sure that Owner Name, Device Server Name and Device Server Password are equal in the Device Server Account properties and Device Server itself. |